Crisp white quartz countertops in a bright suburban kitchen
Rolling Meadows, IL

Countertop Installation in Rolling Meadows, IL

Kimball Hill built this city at twenty houses a week starting in 1953, and he built them small — two and three bedrooms, one bath, and a kitchen to match.

Installing into Rolling Meadows's kitchens

Kimball Hill built this city at twenty houses a week starting in 1953, and he built them small — two and three bedrooms, one bath, and a kitchen to match. Many are still close to their original footprint, which makes Rolling Meadows the shortest-run install work we do anywhere.

What comes out of a Rolling Meadows kitchen first

Short runs are good news on the day: fewer pieces, often no seam at all, and a crew finished before lunch. It is also why we push back on heavy edge profiles here — on a six-foot run, a big edge eats the room rather than dressing it.

What it costs in Rolling Meadows

Same shop, same crew, same price in Rolling Meadows as in every other town we serve — the 5.2 miles are not a line item.

Install is not a separate line on our quote — it is inside the installed project price. Here is that price. These are the bands that fit Rolling Meadows: the original Kimball Hill homes were two- and three-bedroom, one-bath ranches with very small kitchens, many still close to their original footprint.

Kitchen sizeEngineered QuartzGraniteQuartziteMarble
Galley kitchens in Rolling Meadows (30–45 sqft)$3,600–$6,750$4,200–$7,650$4,500–$8,550$5,100–$9,000
Small kitchens in Rolling Meadows (45–60 sqft)$5,400–$9,000$6,300–$10,200$6,750–$11,400$7,650–$12,000

Installed project ranges as of 2026-07 — template, fabrication and standard installation included. A free in-home template turns the range into a firm number.

If your kitchen is bigger or smaller than its Rolling Meadows neighbors, the full table for every size sits on the countertop installation page — the numbers there are the same numbers, just with more rows.

Getting to Rolling Meadows

Rolling Meadows sits about 5.2 miles from the shop at 2260 Elmhurst Rd, Elk Grove Village — 7-8 miles northwest of the shop via IL-53/Algonquin Rd; roughly 15-20 minutes.

Rolling Meadows is in Cook County, Illinois — one of 65 towns and 117 ZIP codes we serve in that county, at a median 13.8 miles from the factory. The nearest other towns on our list are Arlington Heights (2.2 mi), Palatine (3 mi), Mount Prospect (4.3 mi), so a Rolling Meadows job and a Arlington Heights job are usually on the same run.

Permits in Rolling Meadows

The rule of thumb, and who actually decides.

Install day is when the old top comes off and the sink comes apart, so it is the day the permit question actually bites.

In Rolling Meadows that question goes to the City of Rolling Meadows Community Development Department at (847) 506-6030. We are a countertop shop, not a permit authority: where a job needs one we say so in the quote, and where the village has not published a rule we say that too rather than guessing on your behalf.

Rolling Meadows questions

Do you install countertops everywhere in Rolling Meadows?

Yes — all of Rolling Meadows, and the rest of Cook County with it. The shop is 5.2 miles away at 2260 Elmhurst Rd in Elk Grove Village, and the crew that templates your kitchen is the crew that installs it. No part of Rolling Meadows is far enough away to be somebody else's problem.

Will the installers hook my sink and plumbing back up?

Usually not — most fabricators set the tops, mount the undermount sink, and epoxy the seams, but disconnecting and reconnecting plumbing, the disposal, and the cooktop is excluded and falls to your plumber or handyman, typically the next day after adhesives cure (about 24 hours). Confirm this in the quote and book the plumber as soon as you have an install date, planning for roughly a day without a working sink. Ask specifically how the undermount sink is supported: mechanical clips or rails outlast the bare epoxy-blob method that shows up in sagging-sink complaints years later.

Can I install a tile backsplash myself?

Of the three projects, this is the most DIY-friendly: small area, no structural stakes, forgiving timeline. The skills that separate good from regrettable are layout planning around outlets and edges, straight cuts (rent a wet saw), consistent spacing, and clean grout work - and buy 10 to 15 percent extra tile for cuts and breakage. Professional labor runs roughly $5 to $20 per square foot if you decide midway that a flawless finish matters more than the savings.

Can I install my own backsplash, or should I hire a tile setter?

A straight running-bond or stacked ceramic backsplash is one of the most DIY-friendly tile jobs in a house - small format, no water exposure like a shower, and you save roughly $10-15 per square foot in labor. Hand it to a pro when the job involves glass tile (visible adhesive and cut edges), natural stone (sealing, blade chatter, breakage), herringbone or diagonal layouts (compounding alignment errors), large-format panels, or any slab product, which is fabricator work full stop. Whoever installs it, outlets are the tell: sloppy cuts around receptacles are the first thing a trained eye notices.

Countertop Installation in Rolling Meadows — get a real number

One crew from tape measure to last bead of silicone, out of the shop at 2260 Elmhurst Rd. Rolling Meadows is 5.2 miles from the shop, which is close enough that we come back fast if anything ever needs attention.

Get your free quote More about countertop installation

Ready for a real number?

Free in-home template and an honest quote — you keep your money until there's a countertop to trade it for.