Countertop Fabrication in Mount Prospect, IL

In Elk Grove Village, 5.3 miles from Mount Prospect, at 2260 Elmhurst Rd. The saw, the CNC and the polishing are all in that one building — we do not send your slab to a third-party shop and we do not cut stone in your driveway. If a piece needs recutting, it comes back to the same machine that made it.

Because every cutout and faucet hole is cut at the shop from exact specifications, not on site. An undermount sink usually has to be physically at the house on template day so the templater can capture the mounting and reveal precisely. Changing the sink, faucet configuration, or cooktop after templating means re-programming or re-cutting the stone, which typically adds one to three weeks and can add cost — this is the single most common self-inflicted countertop delay.

Because the sink cutout and faucet holes are cut into the stone during fabrication to match your exact fixtures, not adjusted on site. The templater records the precise sink model and faucet spread, so a sink chosen after template day forces either a re-template or a delay while the shop waits. Buy the sink, faucet, and cooktop before scheduling the template visit and have them physically at the house.

A properly fabricated miter is joined with color-matched epoxy and lasts decades on a horizontal countertop, so seam failure is rare. The realistic risk is a hard knock directly on the mitered corner, which can chip the joint - and a repair at a seam is more visible than one in the field of the stone. Softer stones like marble are more vulnerable than granite, quartzite, or quartz; use pH-neutral cleaners and do not let acidic liquids sit on the seam.

Quotes are usually expressed per square foot, but stone is bought by the slab, and that mismatch explains several surprises. If your kitchen needs 55 sq ft and slabs run 50 sq ft, you are buying two slabs and paying for the waste — sometimes a small layout tweak that fits one slab saves four figures. It also makes vein placement a real decision: ask to see your countertop outlines laid over the actual slab before cutting, so the dramatic vein lands on the island rather than under the dish rack.