White Oak 3D Honed installed — a backsplash finished with this tile. Zoom in and read the pattern before you pick.
BacksplashWhite Oak 3D Honed
White-Warm
Measured surface color #c0bdbd, averaging #c3c1c3.
Flat surfaces read as one solid tone; heavily patterned ones vary piece to piece, so we lay them out with you before we cut.
- Style 3d
- Color warm white
- tile-to-tile variation Medium
What kind of tile is White Oak 3D Honed?
We stock White Oak 3D Honed as marble in a three-dimensional shape, 6x12x6. It reads white-warm. We stock 2 formats of it — 6x12x6, 6X24. Marble is soft natural stone. Behind a range it is a commitment to sealing and to wiping acids off quickly.
Sizes and finishes
How it is actually sold — measured off the spec sheet, not rounded.
Sizes
White Oak 3D Honed is made in 2 sizes. Size is the decision people skip and then notice every day: it sets how much grout line ends up in the field, and a larger module on the same wall reads calmer than a small one.
- 6x12x6
- 6X24
Finishes
It comes in one finish, 3d honed.
- 3D Honed
Planning the wall
What White Oak 3D Honed works out to on your wall, from its own published size.
| Size (inches) | Pieces per 10 sq ft | Grout line per sq ft |
|---|---|---|
| 6×24 | 10 | none — set without grout |
Arithmetic on the published size; a straight grid layout. Herringbone and other patterns cut more pieces.
White Oak 3D Honed is a 6×24 module, which works out to about 10 pieces for each 10 square feet you cover.
6×24 is large-format — any edge of 15 inches or more — and large-format tile needs a flatter wall than small tile does, so we check the wall before we quote it.
Counts are before cuts — outlets, window returns and the ends of a run all take pieces. The install itself, from wall prep to caulk, is on our backsplash installation page.
White Oak 3D Honed or Gray Oak 3D Honed?
White Oak 3D Honed and Gray Oak 3D Honed are easy to confuse on a sample board: they share the same material, collection, style, certifications, sizes and finish. What separates them:
- Measured off each swatch, White Oak 3D Honed reads #C0BDBD (light, essentially neutral) and Gray Oak 3D Honed reads #C9C3BD (light, essentially neutral), so White Oak 3D Honed sits about as light as Gray Oak 3D Honed on the wall.
What to expect once it is installed
The ratings that decide whether the finished wall matches the sample.
Grout free
No grout lines by design. That removes the thing most people end up scrubbing, and it puts the burden on a flat substrate instead — which we verify before quoting, not after.
Piece-to-piece variation: Medium
Variation between pieces: medium. Pieces run close enough that nobody will read the differences across a finished run.
Certifications
Certified to Greenguard Gold · USGBC/LEED. Gold is the higher of the two Greenguard tiers, and the difference between them is a lower limit on indoor emissions. It contributes toward LEED where that is part of the brief.
What to put next to it
Built from the color we measured off White Oak 3D Honed itself, not from its name.
We measured this tile's own swatch at #C0BDBD — light and essentially neutral. The closest color we hold pairing data for is Greige, so that is what the recommendations below are built from. Close enough to neutral that the cabinets get to make the decisions; this will follow them.
Cabinets
- Pure White — walls one step warmer than the cabinets so the white reads crisp. Against this surface it is a step lighter, which lifts the surface without washing it out classic
Countertop
- White Veined (Marble-Look) — Greige keeps the veined white from feeling icy — the counter reads like linen instead of a showroom slab, and fingerprints vanish into the warmth.. Against this surface it is a step lighter, which lifts the surface without washing it out current
Hardware
- Warm Brass / Satin Gold — Brass pulls the hidden taupe out of greige, and as the lacquer softens over the years the pulls just look more collected, never tarnished.. Against this surface it is close in weight, so the two will blend rather than contrast current
Flooring
- Natural / White Oak — Greige and natural oak share the same beige undertone, so the cabinets seem to grow out of the floor — a quiet trick that makes small kitchens feel seamless.. Against this surface it is close in weight, so the two will blend rather than contrast solid
Questions about White Oak 3D Honed
Answered from this product’s own spec sheet and our measurement of it.
What size is White Oak 3D Honed?
White Oak 3D Honed comes in 2 sizes: 6x12x6 · 6X24. Pick the size before the color. It decides how much grout line ends up in the field, and on the same wall a larger module reads calmer than a small one.
What color is White Oak 3D Honed, really?
We measured its own swatch at #C0BDBD — light and essentially neutral. It sits close to neutral, so it takes direction from the cabinets rather than fighting them. Names are marketing; that number is what the camera saw.
What is White Oak 3D Honed made of?
White Oak 3D Honed is a marble tile, which is what decides how it is cared for — see the sealing answer below.
Does White Oak 3D Honed need sealing?
Yes. Marble is porous. It wants sealing on installation and re-sealing periodically, and it will etch where an acid sits on it — lemon, wine, some cleaners. Beautiful, and a real commitment.
Does White Oak 3D Honed need grout?
No — it is designed to be set without grout lines. That installs faster and leaves nothing to discolor, but the substrate has to be genuinely flat. We check that before we quote, not after.
White Oak 3D Honed installed
7 photographs of this tile in finished rooms — scroll the rail, tap any shot to zoom.
Close up
Swatches
Tiles that look like White Oak 3D Honed
-
-
-
-
White Oak 3D Honed specifications
- Available size6x12x6
- Available size6X24
Finishes 3D Honed
Rated for Flooring
Ready for a real number?
Free in-home template and an honest quote — you keep your money until there's a countertop to trade it for.