Countertop Fabrication in Roselle, IL
Ten to eleven miles southwest by IL-390.
Cutting Roselle kitchens on 4.5 miles of road
Ten to eleven miles southwest by IL-390. Roselle's 1970s-80s stock runs to L-shape-plus-peninsula kitchens, which is the layout that generates the most seam decisions per square foot of anything we cut.
Where the seams land in a Roselle kitchen
An L plus a peninsula has at least two inside corners, and an inside corner is where stone is weakest. Where the seam lands relative to those corners is the difference between a top that reads as one piece and one that shows its joints under the window light.
What it costs in Roselle
Same shop, same crew, same price in Roselle as in every other town we serve — the 4.5 miles are not a line item.
Fabrication is not a separate invoice. It is the middle of the installed price below, and it is the part that happens in our building. These are the bands that fit Roselle: 1970s-80s split-levels and two-stories with L-shape-plus-peninsula kitchens, plus townhome clusters.
| Kitchen size | Engineered Quartz | Granite | Quartzite | Marble |
|---|---|---|---|---|
| Small kitchens in Roselle (45–60 sqft) | $5,400–$9,000 | $6,300–$10,200 | $6,750–$11,400 | $7,650–$12,000 |
| Medium kitchens in Roselle (60–75 sqft) | $7,200–$11,250 | $8,400–$12,750 | $9,000–$14,250 | $10,200–$15,000 |
Installed project ranges as of 2026-07 — template, fabrication and standard installation included. A free in-home template turns the range into a firm number.
If your kitchen is bigger or smaller than its Roselle neighbors, the full table for every size sits on the countertop fabrication page — the numbers there are the same numbers, just with more rows.
From the shop to Roselle
The stone for a Roselle kitchen is cut 4.5 miles away at 2260 Elmhurst Rd in Elk Grove Village, then driven to you — 10-11 miles southwest of the shop via IL-390 west; roughly 15-20 minutes.
Roselle is in DuPage County, Illinois — one of 14 towns and 33 ZIP codes we serve in that county, at a median 14.5 miles from the factory. The nearest other towns on our list are Itasca (3.3 mi), Schaumburg (3.5 mi), Elk Grove Village (4.5 mi), so a Roselle job and a Itasca job are usually on the same run.
Roselle questions
Where is a Roselle countertop actually cut?
In Elk Grove Village, 4.5 miles from Roselle, at 2260 Elmhurst Rd. The saw, the CNC and the polishing are all in that one building — we do not send your slab to a third-party shop and we do not cut stone in your driveway. If a piece needs recutting, it comes back to the same machine that made it.
Does using a local fabricator make my countertop more sustainable?
Modestly, and in ways worth having: shorter slab transport, the option to buy remnants for a vanity or laundry top instead of sending offcuts to the dumpster, and a shop you can actually visit to ask about water recycling and dust control. Be honest about the limits, though — the slab itself may have crossed an ocean before reaching the shop, and the production footprint of the material dwarfs the last fifty miles. The bigger sustainability lever is picking something durable that you will keep for decades.
How do I know a slab sold as "quartzite" is real quartzite?
Ask the fabricator to acid-test a sample: put a drop of lemon juice or vinegar on it for 10-15 minutes — true quartzite will not etch, while dolomitic marble sold under names like "super white" often will. Also try scratching a hidden spot with a steel knife tip; real quartzite (~7 Mohs) resists it. This matters because mislabeled "soft quartzite" behaves like marble but is priced like quartzite.
How much does upgrading the countertop edge cost?
A basic eased, pencil, or slight-bevel edge is normally included in the fabrication price. Per 2026 national trade pricing, simple upgrades like a wider bevel or half bullnose add about $5-12 per linear foot, mid-range profiles like full bullnose or ogee add $12-20, and premium work like DuPont, laminated, or mitered edges adds $20-35 or more. A typical kitchen exposes 20-35 linear feet of edge, so going premium everywhere usually adds a few hundred dollars - real money, but small next to the slab itself, and you can cut it further by upgrading only the island.
How much extra do waterfall edges and thick mitered edges really cost?
More than most people budget for. As of mid-2026 fabricator pricing, a mitered edge (the technique behind waterfall sides and chunky-looking tops) adds roughly $30-$80 per linear foot over a standard eased edge, waterfall corners run about $150-$300 or more each, and a full waterfall island typically adds $1,000-$3,000 once you count the extra vertical stone and the precision 45-degree cutting and polishing. Porcelain miters cost another 20-30 percent on top because of specialized tooling. It is a legitimate look — the vertical panel also protects island cabinetry from scuffs — but it competes directly with simply upgrading the material itself.
Where this fits
Countertop Fabrication is one of eight things we do, and Roselle is one of twelve towns with its own page.
Countertops in Roselle, IL
TownHousing stock, permits and pricing for Roselle across every service.
DuPage County, IL
CountyAll 14 towns and 33 ZIP codes we serve in DuPage County.
Countertop Fabrication — how it works
ServiceThe whole service, every town: We cut, profile, and polish your slab in-house so the piece that shows up is the piece we…
Countertop Fabrication in Itasca, 3.3 mi from Roselle
Nearby townThe nearest town to Roselle with its own countertop fabrication page.
Countertop Fabrication in Schaumburg, 3.5 mi from Roselle
Nearby townThe nearest town to Roselle with its own countertop fabrication page.
Countertop Fabrication in Elk Grove Village, 4.5 mi from Roselle
Nearby townThe nearest town to Roselle with its own countertop fabrication page.
Granite Countertops in Roselle
Also in this townGranite Countertops for Roselle kitchens. Natural granite with the kind of movement no two slabs share — sealed and ready…
Marble & Quartzite Countertops in Roselle
Also in this townMarble & Quartzite Countertops for Roselle kitchens. Show-stopping natural marble and hard-wearing quartzite for the kitchens that…
Countertop Fabrication in Roselle — get a real number
Your slab is cut in Elk Grove Village and driven to you — the shop is not a subcontractor in another state. Roselle is 4.5 miles from the shop, which is close enough that we come back fast if anything ever needs attention.
Ready for a real number?
Free in-home template and an honest quote — you keep your money until there's a countertop to trade it for.